Avalon H Series Wartungshandbuch PDF herunterladen (Seite 170)

Installation Instructions for 45H & 47H Mortise Locks

BEST ACCESS SYSTEMS

a Division of Stanley Security Solutions, Inc.

Installing the trim

15 Install inside and outside levers

For standard lever installation (Figure 15a)

1 Unscrew the inside spindle one full turn to allow the

spindles to turn freely.

Note: Remove the label from the inside spindle.

2 With the handle pointing toward the door hinges,

insert the outside lever and spindle assembly into the

lock from the outside of the door.

Note: The 17 style lever is handed. The lever should

curve downward when installed on the door.

3 Slide the inside lever onto the inside spindle and

secure it with the set screw.

4 Turn the levers to check that they operate smoothly.

For one side only lever installation (Figure 15b)

For one side only lever installation, use a hook spindle.

Note: The hook spindle can be installed on either side of

the door, but the inside lever should always be used with

the hook spindle.

1 Insert the upper hook spindle into the hub cavity with

the hook towards the latch as shown in Figure 15b.

2 Insert the lower hook spindle alongside the upper

spindle and align the pin holes.

3 Push the pin into the spindles. Make sure the pin is

fully inserted.

4 Slide the lever onto the spindle and secure with the set

screw.

5 Turn the lever to check that it operates smoothly.

Figure 15a Installing the levers

Location

of set

screw

Outside of door

Inside of door

Spindle

assembly

Figure 15b Installing the hook spindle

1 Upper hook spindle

2 Lower hook spindle

3 Pin

1 2 ... 165 166 167 168 169 170 171 172 173 174 175 ... 195 196

Keine Kommentare

Avalon H Series Wartungshandbuch Seite 170