Avalon H Series Wartungshandbuch Seite 180

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 196
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 179
Installation Instructions for 45HW & 47HW Electrified Mortise Locks
BEST ACCESS SYSTEMS
a Division of Stanley Security Solutions, Inc.
Installing the trim
8
13 Install trim mounting plates
1 For J trim, position the J alignment plate (Figure 15b)
on the outside of the door.
2 For all trim, insert the outside trim mounting plate
through the door and mortise case.
3 Position the inside trim mounting plate opposite the
outside trim mounting plate and screw them securely
in place.
Caution: Do not overtighten the trim mounting
plate screws. Overtightening may damage the
locking mechanism.
14 Install concealed cylinder (N trim only)
1 Use a cylinder wrench to thread the cylinder into the
mortise case so that the groove around the cylinder is
even with the door surface.
Caution: A malfunction can occur if the cylinder is
threaded in too far.
2 Secure the cylinder in the mortise case with the
cylinder retainer screw.
Figure 13 Installing the trim mounting plates
Outside
mounting
plate
Inside
mounting
plate
Figure 14 Installing the concealed cylinder
Cylinder
retainer
screw
Seitenansicht 179
1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 195 196

Kommentare zu diesen Handbüchern

Keine Kommentare